Home / Check engine codes / P0335
P0335: Crankshaft position sensor circuit
Stop and checkSystem: Engine sensors
What P0335 means
The computer is not getting a good signal from the crankshaft position sensor. Without it the engine may not start or may stall.
Common symptoms
- Hard starting
- Stalling
- Shaking or jerking
Common causes
- Failing crankshaft position sensor
- Damaged wiring, corroded connector or blown fuse
- Stretched timing chain or belt, or a jumped tooth
Can I keep driving?
Stop and check. Avoid driving until it is checked. Driving with this problem can cause serious and expensive damage.
What to do next
- Write down the code and any symptoms you notice.
- Check the simple things first: the fuel cap, loose connectors and fluid levels where they apply.
- Do not just clear the code. If the light comes back, the cause is still there and needs a proper diagnosis.
- Read live data and freeze frame data with an OBD-II scanner app to see what the car was doing when the code was set.
Read P0335 from your own car
DriveHub connects to a $15 to $30 OBD-II adapter, reads the code from your car and explains it in plain English. iPhone and Android.
General information, not a diagnosis. Causes vary by make, model and engine. If you are unsure, have the car inspected.